home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Elo Touch Tools Web Enabler
/
Elo TouchTools Web Enabler.iso
/
MonMouse
/
OS2Warp
/
!READ.ME!
next >
Wrap
Text File
|
1997-06-02
|
4KB
|
99 lines
MonitorMouse(R) for OS/2
Version 2.2
Notes
June 2, 1997
----------------------------------------------------------------
VERSIONS OF OS/2 SUPPORTED
----------------------------------------------------------------
MonitorMouse for OS/2 is compatible with OS/2 versions 1.3
through OS/2 Warp 4.0 (or later). For OS/2 1.3 installations, see
the !READ.ME! file in the OS2-13 subdirectory for more
information.
----------------------------------------------------------------
CHANGES TO THE MANUAL
----------------------------------------------------------------
The current manual for MonitorMouse for OS/2 is version 2.1.
MonitorMouse for OS/2 version 2.2 supports the IntelliTouch E281-
2310 serial touchscreen controller. You may now additionally
specify "2310" as the controller type on the MOUMOU0x.SYS command
line. See pages 10 and 11 in the manual.
----------------------------------------------------------------
MONITORMOUSE FOR OS/2 ERROR MESSAGES
----------------------------------------------------------------
If MonitorMouse for OS/2 displays an error message and does not
load, MOUSE.SYS and VMOUSE.SYS will also not load. This is
because the STYPE flag was specified on the DEVICE=MOUSE.SYS
command line.
On some systems, moving the mouse will crash the system after it
comes up without MonitorMouse for OS/2 loaded. IBM has been
informed of this problem.
----------------------------------------------------------------
INTELLITOUCH TROUBLESHOOTING
----------------------------------------------------------------
In addition to the COMDUMP and BUSSTAT troubleshooting utilities,
(see Appendix C in the MonitorMouse for OS/2 User's Guide),
IntelliTouch users may also run the SAWDUMP program under DOS to
display the touchscreen controller's on-board diagnostic results.
Contact Elo TouchSystems Technical Support as necessary.
----------------------------------------------------------------
PROGRAMMING INFORMATION
----------------------------------------------------------------
Presentation Manager applications can launch the Touchscreen
Control Panel (ELOCAL2.EXE) with the DosExecPgm() function. It is
also possible to directly call the calibration procedure in the
Touchscreen Control Panel by executing ELOCAL2.EXE with a flag as
follows:
ELOCAL2 -Calibrate
----------------------------------------------------------------
OLD INTELLITOUCH FIRMWARE
----------------------------------------------------------------
If your IntelliTouch controller firmware is not version 2.2 or
later, you will not get optimal performance from MonitorMouse for
OS/2. The label on the EPROM will clearly indicate if you have
version 2.2 or later. Contact Elo TouchSystems Technical Support
(see below) for a free upgrade kit as necessary. Specify serial
or PC-Bus controller. The new firmware triples the performance,
doubles the resolution, and doubles the sensitivity of the
touchscreen.
With old firmware, you may need to use the -w flag described in
the manual.
---------------------------------------------------------------
HOW TO REACH ELO
---------------------------------------------------------------
Elo TouchSystems, Inc.
41752 Christy Street
Fremont, CA 94538
VOICE: (510) 651-2340
FAX: (510) 651-3511
Technical Support Line
VOICE: (800) 489-9935 (toll free)
VOICE: (510) 651-7589
VOICE: +49 0 81 61/6 70 42 (Germany)
FAX: (510) 651-3511
E-MAIL: elotech@elotouch.com
WEB: www.elotouch.com
BBS: (510) 651-1224
CompuServe: GO ELOTOUCH
Select Elo from the Libraries and Messages menus.